Bridge Autocalls; Figure 12-2. Bridge Autocall Listing - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

Bridge Autocalls

12-10
The Bridge Autocalls feature allows a bridge to automatically call
a destination if a packet is received for that destination.
To list any autocalls that are already set up use the following
syntax:
[co] br ls -l
where moves the BCC into config mode (if required), br takes
co
you to the bridge# object and ls -l lists all the bridge objects.
A screen similar to the following appears:
bcc> co br ls -l
autocall/mac/789128472630
autocall/ip/198.200.100.10
bridge#
Figure 12-2.
Edit or create an autocall by using the following syntax:
[co] br [new|mod] au type/address
where co moves the BCC into config mode (if required), br takes
you to the bridge# object, new and mod are the new and modify
verbs (optional), au takes you to the autocall# object, type is the
type of autocall to be made and address is the MAC or IP address
to call.
Typing i at the autocall# object prompt lists all the parameters.
Bridge Autocall Listing
117237-E Rev.00