Displaying Path Information; Listing Paths - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

Displaying Path Information

Listing Paths

7-2
Paths contain information about a destination host or network.
When a unit is first configured it has a default path of eth/lan01.
This path points to the local network. If Quick Setup or Nautica
Wizard were used to set up the router there will be another path
called RemotePPP or RemoteNautica.
Note: The RemotePPP and RemoteNautica names may change
once the unit makes the first call to these paths after setup is
complete.
To list all the paths setup on the unit, at the box# prompt, use the
ls -l verb:
box# ls -l
A list of all devices and other objects is displayed:
device/box/MARLIN
device/eth/LAN01
device/wan/WAN01
device/bri/ISDN-TA01
device/isdn/ISDN01
device/pri/ISDN-PRI01
path/eth/LAN01
path/nau/RemoteNautica
wins/Remote_Server/group/static
Note: This list has been deliberately shortened.
117237-E Rev.00