Assingning Ppp Profiles To Incoming Calls - Bay Networks NauticaRS Reference Manual

NauticaRS 5.5R Reference Guide

Assingning PPP Profiles to Incoming Calls

8-6
To assign a profile so that it affects incoming calls, the profile is
assigned to a specific ISDN device (Chapter 6). To assign a
profile to a device, use the following syntax:
[co] dev type/name ppp-p profile-name
where co moves the router into config mode (if required), dev
takes the BCC into the device object, type/name is the device type
and the name of the device to be edited, ppp-p is the MTD for the
ppp-profile parameter and profile-name is the name of the profile
to be assigned to this device.
For example, to assign a PPP Profile called 'User' to a BRI device
called ISDN-TA01, the following is typed:
bcc> co
box# dev bri/isdn-ta01
device/bri/isdn-ta01# ppp-p user
[Save] device/bri/isdn-ta01#
The previous command set can also be entered directly onto one
line:
bcc> co dev bri/isdn-ta01 ppp-p user
[Save] device/bri/isdn-ta01#
117237-E Rev.00