Isdn Timebands - Bay Networks NauticaRS Reference Manual

ISDN Timebands

117237-E Rev.00
Timebands allow the user to set up specific times of the week on
which certain actions can or cannot be performed. The option is
not available on the Nautica CLAM or Nautica 200.
To view existing timebands, type ls -l at the isdn# object prompt.
A list of all the created ISDN objects will be displayed, including
timebands.
To create or modify a Timeband use the following syntax:
[co] is [new|mod] ti name/days
where co moves the BCC into config mode (if required), is is the
MTD for the isdn# object, new and mod are the new and modify
verbs (optional), ti is the MTD for the timeband# object, name is
the name assigned to this timeband and days is the days this
timeband is active.
Note: When entering the days, use only the first two letters of
each day and separate them with a colon [
list must end in a colon [
When you create or modify the timeband, the BCC moves to the
timeband object. Typing i at this object prompt lists the timeband
parameters.
:
].
:
Configuring ISDN
]. The last day in the
11-21