NauticaRS 5.5R Reference Guide
Interface Status
Figure 18-3.
18-20
OSPF Interface status displays details on all the different areas
that can be reached through this interface. To show this data, use
the following syntax at any prompt:
ospf# sh ip os in
Where sh is the show verb, ip takes BCC to the IP context, os
displays OSPF statistics and in shows the OSPF Interface
statistics.
Entering this command causes the OSPF Interface Status window
to appear:
OSPF Interface Status Window
In the table below, click on the parameter for which you require
further assistance:
IPAddr
State
BDRId
Nbrs
Flds
AdjCnt
Area
DRId
Type
Metric
DAcks
117237-E Rev.00