Creating The Ipsec Tunnel - Bay Networks NauticaRS Reference Manual

Creating the IPSec Tunnel

117237-E Rev.00
An IPSec tunnel is created with an IPSec path. IPSec is a new
path type that is only available if you are running an IPSec
version of the NauticaRS software (see
Create an IPSec path as follows:
bcc> co pa ipsec/name
Where ipsec is the path type and name is a name you have
assigned to this path.
After the path is created, BCC moves into the path object. Typing
i at the object prompt lists the attributes. In the table below, click
on the attribute for which you require further assistance:
type
name
enable
local-ipaddr
remote-ipaddr
cypher-type
authent-type
anti-replay
idle-timer
ike-enable
local-net
remote-net
Working With IP Security
Table 20-1).
remote-mask
text-secret
hex-secret
rekey-timeout
rekey-kbytes
local-spi
remote-spi
tx-cipher-key
rx-cipher-key
tx-authent-key
rx-authent-key
20-15