Removing And Installing Hall Sender G40; Removing And Installing Engine Speed Sender G28 - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.2/63; 77 kW TSI engine - Edition 11.2014
1.4 Removing and installing Hall sender -
G40-
Removing
– Loosen hose clamps -1- and -2- and remove air guide pipes.
– Separate electrical plug connection -1-.
– Unscrew screw -2- and remove Hall sender - G40- .
Install
– Installation is carried out in the reverse order.
Tightening torque
Component
Screw for hall sender
1.5 Removing and installing engine speed
sender - G28-
Special tools and workshop equipment required
♦ Socket insert 4 mm - T10370-
Removing
– Remove the sound dampening system -1- ⇒ Body Work; Rep.
gr. 66 .
– Undo screw -arrow- and place charge air cooler pump - V188-
to one side.
284
Rep. gr.28 - Ignition system
Nm
8 Nm