Removing And Installing The Bosch Voltage Regulator; Removing And Installing The Valeo Voltage Regulator - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
Electrical system - Edition 12.2013
5.5 Removing and installing the Bosch volt‐
age regulator
– Unscrew the fixing nuts -arrows A- and release the fixing screw
-arrow B- of the screen cap.
– Remove cover.
– Unscrew the fixing screws -arrows- of the voltage regulator
and remove voltage regulator.
– The installation occurs in reverse order.
5.6 Removing and installing the Valeo volt‐
age regulator
– Press off protective cap on the rear side of the generator
-arrows-.
– Release screws -1- and nut -2-.
– Remove voltage regulator.
– The installation occurs in reverse order.
14
Rep. gr.27 - Starter, current supply, CCS
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�