Manual Gearbox; Automatic Gearbox - Skoda KAMIQ 2020 Owner's Manual

126 Starting and driving ›
Settings
Automatic activation
Upon start-up of the engine.
▶
By selecting the driving mode Eco
▶
eration.
Deactivate/activate system
›
Press the button.
When the system is deactivated, the symbol illumi-
nates in the button .
If a system-related engine switch-off occurs and the
system is deactivated, the engine will start.
Troubleshooting
The engine does not switch off when stopping, or
it starts before starting up
The system has detected that the engine is running.

Manual gearbox

Operation
NOTICE
Danger of engine damage!
Shift into higher gear before reaching the red area
▶
of the rev counter scale.
NOTICE
Danger of gearbox damage!
Depress the clutch pedal all the way down.
▶
If not in the process of changing gear, do not leave
▶
your hand on the gearshift lever.
Engaging reverse gear
›
Stop the vehicle.
›
Depress the clutch pedal completely.
›
Move the shift lever to the neutral position.
›
Push the gearshift lever down.
›
Set this completely to the left.
›
Wait briefly.
›
Engage reverse gear.
Manual gearbox
» page 128, Op-

Automatic gearbox

Lever positions
Neutral
There is no transmission of engine power to the
wheels.
Forward drive / sports program
The gear is changed automatically.
In mode, the gear is changed at higher speeds
than in mode.
Choose between and (spring-loaded posi-
tion)
Moving the selector lever out of the or position
lights up - the selector lever is locked
WARNING
Risk of the stationary vehicle rolling away automati-
cally!
When the selector lever is in the
▶
sition or in manual shift mode, secure the vehicle
with the brake.
Operation
Starting up
›
Keep the brake pedal depressed.
›
Start the engine.
›
Press the button in the selector lever and set it to
the desired position.
›
Release the brake pedal and press the accelerator
pedal lightly.
Speeding up while driving (kick-down)
›
Fully depress the accelerator.
Parked vehicle
The drive wheels are
locked.
Only set the posi-
tion when the vehi-
cle is stationary.
Reverse gear
Only set the posi-
tion when the vehi-
cle is stationary.
›
Press the brake pedal,
and at the same time,
press the button in the
selector lever.
position, po-