Konica Minolta REGIUS 110 Service Manual page 83

Error Description of the error
code
26300 Operation error
− Reader Busy
The operation request from the
console was not executable
because the cassette was
inserted at the same time as the
operation request from the
console was received.
(This error is displayed only on
the console.)
26900 Operation error
− PowerOFF during job
execution
PowerOFF was executed by
pressing the "operation" switch
right after the job search from
the JM.
(This error is displayed only on
the console.)
Response
(References to replacement methods are listed at the end
of the table.)
Operation will continue without any problems.
Perform the operation on the console again after the
cassette is ejected.
Operation will continue without any problems.
Perform the operation on the console again after starting up
the reader that was powered OFF.
Chapter 3 Troubleshooting
3-29