Konica Minolta REGIUS 110 Service Manual page 285

First Front Side
First Front Back Side
Second Front Back Side
This completes the attachment procedure of the exterior panels and the insertion unit.
Go to "7.2.12 Move to the Installed Location (Page 7-16)"
location.
Chapter 7 Periodic Maintenance
4
Attach the first front panel.
•
6 screws (M4 x 8)
Hold the bottom part of the first front panel with both
hand, and attach it by sliding the top part of panel in to
the top panel.
5
Close the second front door.
6
Attach the first front panel.
•
7 screws (M4 x 8)
Hold the bottom part of the first front back panel with
both hand, and attach it by sliding the top part of panel
in to the top panel.
7
Install the first front back panel.
•
6 screws (M4 x 8)
•
1 spacer each (for 4 locations excluding the middle)
and move the equipment back to the installed
7-15