Second Front
Back Side
CN2
CN4
CN5
CN1
CN9
CN2
JP61
First Front Back Side
Second Front Back Side
Chapter 5 Disassembly and Assembly
8
Remove the cables connected to the optical unit.
•
LMC
•
CN1 (ACN1: cable)
•
CN2 (ACN2: cable)
•
CN4 (ACN4: cable)
•
CN5 (ACN5: cable)
•
CN9 (ACN9: cable)
•
LMD
•
CN2 (LMCN2: cable)
This connector may have been fixed very tightly.
•
Eraser unit junction cable
•
JJ61 (JP61: cable)
When removing the connector, hold a notch
on the connector without pulling a cable.
Caution
Giving a strong pull to the cable may cause
it to be broken.
9
Remove the snap ties and other parts.
•
Snap ties at 3 locations
•
Tie fixtures at 3 locations
You do not have to cut off the ties coming with the tie
fixtures.
10
Remove the setscrews on the first front back side
of the optical unit.
•
2 hex/Phillips-head screws (M4 x 12)
11
Remove the setscrews on the second front back
side of the optical unit.
•
2 hex/Phillips-head screws (M4 x 12)
5-13