Konica Minolta REGIUS 110 Service Manual page 136

Chapter 5 Disassembly and Assembly
Second Front Side
Second Front Back Side
19
See " Installation Procedures (Page 5-8)"
and Insertion Unit"
Now, you have finished with the procedures to install the optical unit.
5-16
12
Release the simple fixing lock and move the
optical unit to the second front side.
13
In the second front side, fix the optical unit using
a simple fixing lock.
14
Fully tighten the setscrews on the second front
side.
•
15
Release the simple fixing lock and move the
optical unit to the second front back side.
16
In the second front back side, fix the optical unit
using a simple fixing lock.
17
Fully tighten the setscrews on the second front
back side.
•
18
Release the simple fixing lock.
in
to install the exterior panel and insertion unit.
2 hex/Phillips-head screws (M4 x 12)
2 hex/Phillips-head screws (M4 x 12)
"5.2.3 Removing/Installing the Exterior Panel