Konica Minolta REGIUS 110 Service Manual page 261

17
See " Installation Procedures (Page 5-8)"
and Insertion Unit" to install the first front panel.
12
Click the [Send] button once the step is within the
specified value.
Selected amount of justification will be set.
Adjustment amount of the last justifier
operation performed will be set. Always
Important
perform the justifier operation with the value
to set before clicking on the [Send] button.
13
Eject the cassette.
1. Click the [Move to HP] button.
The cassette will be released from the fixing by the
justifier guide.
2. Eject the cassette from the insertion slot.
The cassette cannot be ejected automatically, so push
up the cassette with your hand from the second front
side.
14
End the service tool.
15
Turn the power OFF.
16
Pull out the interlock release key.
in "5.2.3 Removing/Installing the Exterior Panel
Chapter 6 Adjustment
6-9