Panel name
Adjustment
Following adjustment can be performed.
•
Amount of Justification (Receiver Motor)
•
Pressing Amount (Transporter Motor)
•
Monitoring
Confirmation of the operation by step operation of the mechanical can be
performed.
•
Monitor of the sensor can be performed.
Stand-alone operation confirmation of the unit and operation confirmation by step operation is described
in this chapter.
•
See
"4.3 Confirming Operation for Each Unit (Page 4-6)"
confirmation the unit.
•
See
"4.4 Confirming by Step Operation (Page 4-8)"
confirmation by step operation.
•
See
"8.1 Service Tool Screen (Unit Test) (Page 8-2)"
Chapter 4 Confirming Operation Using Service Tool
Description
for the procedure to perform stand-alone
for the procedure to perform the operation
for the description of [Unit Test] screen.
4-5