Konica Minolta REGIUS 110 Service Manual page 223

First Front Side
First Front Side
(Brwon) (Brown)
MDU, etc. Interlock
Switch
(Black)
(Blue) Interlock
Digital Power Supply Relay 1, etc.
7
See " Installation Procedures (Page 5-8)"
and Insertion Unit" to install the first front panel.
Now, you have finished with the procedures to replace the interlock relay 2.
Chapter 5 Disassembly and Assembly
2
Remove the electric component mount panel.
•
8 hex/Phillips-head screws (M4 x 8)
Loosen all screws.
3
Remove the interlock relay 2.
•
2 screws (M4 x 6)
4
Unplug the cable and connect it to the new
interlock relay 1.
5
Install the new interlock relay 2.
•
2 screws (M4 x 6)
6
Install the electric component mount panel that
was removed in Step 2.
•
8 hex/Phillips-head screws (M4 x 8)
in "5.2.3 Removing/Installing the Exterior Panel
5-103