Konica Minolta REGIUS 110 Service Manual page 268

Chapter 6 Adjustment
6-16
3
4
5
F r o
n t P
l a t e
Second Front Side
6
7
Select "14 x 17 inch" for the "Cassette Type".
Click the [Initialization] button for the [Adjustment
of Pressing Amout].
Set the standard cassette facing toward the
magnet (push plate) on the receiver.
Set the direction of the front plate and the
back plate of the cassette in reverse so the
Important
cassette will not be absorbed onto the
magnet absorption plate.
Do not do anything that is not described until
you take out the cassette in
Caution
Equipment may be damaged by the drive
unit and cassette contacting each other
when wrong operation is performed.
Click the [Move To HP] button.
Cassette may tilt toward the push plate unit
by vibration. Cassette will be straightened
Note
by the press down operation, so there is no
need to reset the cassette.
Click the [Pressing Position] button.
Step 11.