Konica Minolta REGIUS 110 Service Manual page 124

Chapter 5 Disassembly and Assembly
Power ON
Connect the Ethernet cable and power cable and turn ON the power.
Second Front Back Side
Now, you have finished with the procedures to turn the power on.
5-4
operation erase
"operation" Switch
1
Connect the Ethernet cable to the equipment.
2
Connect the power cable to the equipment and
power outlet.
3
Turn on the power supply circuit breaker.
4
Press the "operation" switch.
Equipment will start up and initialization will be
performed. When the initialization is completed,
"READY" will be shown on the message display
window.