Konica Minolta REGIUS 110 Service Manual page 3

Introduction
The Direct Digitizer REGIUS MODEL 110 is designed to read REGIUS Plates using a photostimulable
luminescent material as an X-ray detector.
This manual states the cautions and steps for the service engineers who will perform repair or
maintenance of this equipment (or the system including this equipment).
After reading through the manual, please keep it close so you can refer whenever needed.
Cautions
1. Unauthorized reproduction of any part of this manual is prohibited.
2. The contents of this manual are subject to change without notice.
3. Any discrepancies, errors or omissions noted should be communicated to the manufacturer.
4. Notwithstanding item 3. above, the manufacturer accepts no responsibility whatsoever for any loss
or decrease in profits arising from usage of the product.
Trademark
•
Microsoft and Windows are registered trademark or trademark of the Microsoft Corporation in USA
and other countries.
•
Windows 2000/XP is abbreviation of Windows 2000/XP Professional operating system.
•
All other company names and product names in this manual are trademarks or registered
trademarks of their respective owners.
i