Konica Minolta REGIUS 110 Service Manual page 93

Phenomenon List
Find the corresponding phenomenon from the list and respond according to the reference.
No.
1 Image is dark or black in general (still with structure of the object)
2 Image is bright or white in general (still with structure of the object)
3 Horizontal streak in part of the image
4 Horizontal streak all over the image
5 Vertical streak
6 Quasi-contour in the image
7 Jitter (jagged vertical line) in the image
8 Image size is different (vertically)
9 Image size is different (horizontally)
10 Top and bottom of the image is trimmed
11 Sides of the image is trimmed
12 Unevenness is not calibrated
13 Unevenness calibration data is too high (MAX-MIN is over 300 steps)
14 S value fluctuation
15 Not enough contrast (raw data)
16 Different density left to right
17 Dosage problem (compatibility problem with mAs value and S value, etc.)
18 Sandy image
19 White dot
20 Black dot
21 Monitor display problem (film is OK)
22 Duplex image
23 Sensitivity calibration do not fit within specification
24 All processed images are generally high in contrast
25 All processed images are generally low in contrast
26 Image out of focus
Phenomenon
Chapter 3 Troubleshooting
Reference
page 3-40
page 3-40
page 3-41
page 3-42
page 3-43
page 3-44
page 3-44
page 3-44
page 3-45
page 3-45
page 3-45
page 3-45
page 3-45
page 3-46
page 3-46
page 3-46
page 3-46
page 3-47
page 3-47
page 3-47
page 3-47
page 3-47
page 3-47
page 3-47
page 3-48
page 3-48
3-39