Place a protective pad over the iCS-ECAT to protect it from damage from tools during
the removal of the bolts.
3. Remove the bolts from each crate post.
9.2 Repacking for Relocation
If you need to relocate the robot or other equipment, reverse the installation and unpacking pro-
cedures. Reuse all original packing containers and materials and follow all safety guidelines
for installation. Improper packaging for shipment will void your warranty. Specify this to the
carrier if you must ship the robot.
!
9.3 Transportation and Storage
This equipment must be shipped and stored within the range –25 to +60° C. Humidity should
be less than 75%, non-condensing. The robot should be shipped and stored in the supplied
crate that is ASTM D4169-16 DC12 certified, and designed to prevent damage from normal
shock and vibration. You should protect the crate from excessive shock and vibration.
Use a forklift, pallet jack, or similar device to transport and store the packaged equipment.
22793-000 Rev. A
CAUTION: PROPERTY DAMAGE RISK
Always ship the robot upright.
iX4 650 H/HS and 800 H/HS Robot with EtherCAT
User's Manual (Cat. No. I656)
Figure 9-3. Removal of Bolt
Appendix
189