c. Reinstall the two side covers.
11. Install the battery in the platform.
The platform brakes cannot be released until the battery is installed. Refer to Installing
the Battery on page 33.
Repacking for Relocation
If the platform or other equipment needs to be relocated, reverse the steps in the installation
procedures in this chapter. Reuse the original packing crate and materials and follow all safety
notes used for installation. Improper packaging for shipment will void your warranty.
The platform must always be shipped in an upright orientation.
Chapter 3: Setup
Figure 3-8. Wheel Pin Hole
Figure 3-9. Wheel Pin
LD Platform User's Guide, 11970-000 Rev E
Page 32 of 142