1.4 Robot Options
Cable Inlet Box
The optional cable inlet box can be used to increase the iX4-650H/800H robot's IP rating to
IP65.
The part number of the cable inlet box is 08765-000.
NOTE: The optional cable inlet box (for the iX4-650H/800H) is not USDA com-
pliant. Drainage of wash-down from the cable seal assembly does not comply
with USDA requirements.
The cable seal assembly must be mounted on the top of the robot during the robot installation
process. The cable seal assembly is an extra-cost option, and is shipped separately from the
robot. Refer to Installing a Cable Inlet Box for iX4-650H/800H Robots on page 88 for more
information.
24
Pin No.
Signal Designation
25
Output 7
26
Output 8
Shell
Pin 1
Pin 10
Pin 19
iX4 650 H/HS and 800 H/HS Robot with EtherCAT
User's Manual (Cat. No. I656)
Wire Color
White/Red
White/Blue
Shield
Pin 9
Pin 18
Pin 26
22793-000 Rev. A