4.4 Connecting 200 to 240 VAC Power Cable
Figure 4-12. Single-Phase Load across L1 and L2 of a Three-Phase Supply
Item
A
Robot 1Ø 200 to 240 VAC
B
User-supplied AC power cable
C
200 to 240 VAC
Fuses F4 and F5
D
E
L=Line 1
F
N=Line 2
G
L3=Line 3 (not used)
H
E= Earth Ground
AC Power Supply Connector
The cable and accessory box that came with your system contains the AC power supply con-
nector. The supplied plug is internally labeled for the AC power connections (L, E, N).
Additional Information: Refer to Power Connector Specifications on page 178 for
more information.
84
Description
NOTE: These fuses must be slow-blow.
iX4 650 H/HS and 800 H/HS Robot with EtherCAT
User's Manual (Cat. No. I656)
22793-000 Rev. A