Table of Contents
Advertisement
This chapter provides information about status codes that may appear on the status display
panel.
8.1 Status Display Panel
The status display panel shows alpha-numeric codes that indicate the operating status of the
robot. These codes provide details for quickly isolating problems during troubleshooting and
determining the operating state of the robot.
In the Display Panel Codes table, the '#' in the LED column represents a single digit. The digits
will be displayed as shown below.
8.2 Status Codes Table
The following table lists the possible informational, warning, and error messages that V+ will
generate, and display on the robot's 2-digit Status Display.
These messages use the following numbering scheme:
Informational Messages: Numbers 0 to 49, provide information
l
Warning Messages: Numbers 50 to 299, list warning messages about abnormal system
l
behavior
Error Messages: Negative numbers, list error messages
l
22793-000 Rev. A
Status Display Panel
Figure 8-1. Status Display Panel
0
1
iX4 650 H/HS and 800 H/HS Robot with EtherCAT
User's Manual (Cat. No. I656)
Chapter 8: Status Codes
2
3
4
5
6
7
8
9
179
Advertisement
Table of Contents
