3.3 Unpacking and Inspecting the Equipment
The robots must always be stored and shipped in an upright position in a clean, dry area that
is free from condensation. Do not lay the crate on its side or any other non-upright position;
this could damage the robot.
The eCobra 600 robot weighs 41 kg (90 lb), the eCobra 800 robot weighs 43 kg (95 lb), and the
eCobra 800 Inverted weighs 51 kg (112 lb), all with no options installed.
3.3 Unpacking and Inspecting the Equipment
Before Unpacking
Carefully inspect all shipping crates for evidence of damage during transit. Pay special atten-
tion to any tilt and shock indication labels on the exteriors of the containers. If any damage is
indicated, request that the carrier's agent be present at the time the container is unpacked.
Upon Unpacking
Before signing the carrier's delivery sheet, please compare the actual items received (not just
the packing slip) with your equipment purchase order and verify that all items are present and
that the shipment is correct and free of visible damage.
If the items received do not match the packing slip, or are damaged, do not sign the
l
receipt. Contact Omron Adept Technologies, Inc. as soon as possible.
If the items received do not match your order, please contact Omron Adept Tech-
l
nologies, Inc. immediately.
Inspect each item for external damage as it is removed from its container. If any damage is
evident, contact Omron Adept Technologies, Inc.. See How Can I Get Help? on page 16.
Retain all containers and packaging materials. These items may be necessary to settle claims
or, at a later date, to relocate equipment.
3.4 Repacking for Relocation
If the robot or other equipment needs to be relocated, reverse the steps in the installation pro-
cedures that follow. Reuse all original packing containers and materials and follow all safety
notes used for installation. Improper packaging for shipment will void your warranty. Specify
this to the carrier if the robot is to be shipped.
!
26
CAUTION: PROPERTY DAMAGE RISK
Before unbolting the robot from the mounting surface, fold the outer arm
against the Joint 2 hardstops to help centralize the center of gravity. The robot
must always be shipped in an upright orientation.
eCobra User's Guide
14402-000 Rev. F