Advertisement
4.3 System Register Settings
Settings when using table setting mode (Transistor output type)
Parameter
name
Control Unit
input settings
(HSC / PLS)
Control Unit
input settings
2 (HSC / PLS)
Control Unit
output
settings
(PLS / PWM)
(Note 1)
Displayed items vary according to models.
(Note 2)
Select "Normal input" and "Normal output" for the input and output that is not used for the pulse
output function or high-speed counter function.
(Note 3)
"J-point positioning start input" for each channel can be selected only when "Table setting mode"
is set in the system register no. 407.
Settings when using table setting mode (Relay output type)
Parameter
name
Pulse I/O
cassette
setting
(HSC / PLS)
4-18
No. and setting item
400
High-speed counter
setting
(X0 to X3)
401
High-speed counter
pulse output setting
(X4 to X7)
407 Positioning control mode
setting
402
Pulse / PWM output
setting
(Y0 to YB)
No. and setting item
407 Positioning control mode
setting
400 High-speed
counter setting
X100
(X100 to X102)
400 Pulse output
setting
(Y100 and Y101)
400 High-speed
counter setting
X200
(X200 to X202)
400
Pulse output setting
Settings
To use the J-point control, select J-point positioning start
X0
input of CH0.
To use the J-point control, select J-point positioning start
X1
input of CH1.
X2
Select CH4 Home input or Normal input.
X3
Select CH5 Home input or Normal input.
X4
Select CH0 Home input or Normal input.
X5
Select CH1 Home input or Normal input.
X6
Select CH2 Home input or Normal input.
X7
Select CH3 Home input or Normal input.
Select the table setting mode or FP-X compatible
instruction mode.
CH0
CH1
Select the output allocated to each channel.
CH2
Normal output, PWM output, Pulse output [Table setting
mode],
CH3
Pulse output [FP-X compatible instruction mode]
CH4
CH5
Settings
Select the table setting mode or FP-X compatible
instruction mode.
To use the J-point control, select J-point positioning start
input of CH0.
Select the output allocated to each channel.
Normal output, PWM output, Pulse output [Table setting
CH0
mode],
Pulse output [FP-X compatible instruction mode]
To use the J-point control, select J-point positioning start
input of CH1.
Select the output allocated to each channel.
CH1
Normal output, PWM output, Pulse output [Table setting
mode],
WUME-FPXHPOSG-01
Advertisement
