Advertisement
When the setting is changed, a confirmation message box will be displayed. When the
setting is changed, a confirmation message box appears.
4.
Confirm the change and press the [Yes] button.
A data table tab each is created for the groups set.
● When interpolation control is selected, the data table of the channel numbers of X and Y
axes will be added, and [Interpolation] will be displayed on the tab.
● When changing "Used channel setting" in Configurator PMX, the system registers no. 400
to 402 and 407 corresponding to the I/O used for the positioning control will be
automatically updated.
REFERENCE
4.3 System Register Settings
4.2.2 Setting Parameters
Use the Configurator PMX to allocate the most fundamental parameters for positioning control,
such as the motor rotation direction, pulse output method (CW/CCW and Pulse/Sign), home
input, limit input logic, and positioning control. The following procedure is explained on the
condition that the Configurator PMX has already started.
1.
Select Channel setting>Parameter settings from the menu bar.
The "Parameter settings" dialog box appears.
WUME-FPXHPOSG-01
4.2 Settings in Configurator PMX
4-9
Advertisement
