Advertisement
(Note 1)
When using the target value match ON instruction (F166) or target value match OFF instruction (F167)
in the high-speed counter function, arbitrary output is specified in the range of Y0 to Y29F in a user
program so that it does not overlap the above functions.
(Note 2)
When using the PWM output, the output numbers to be paired are normal output.
■
Pulse I/O cassette input signal
I/O
Pulse output function
No.
CH0 J-point control positioning
X100
control start input
X101
-
X102
CH0 Home input
CH1 J-point control positioning
X200
control start input
X201
-
X202
CH1 Home input
■
Pulse I/O cassette output signal
Pulse output function
I/O
No.
Pulse output
Y100
CH0 CW or pulse output
Y101
CH0 CCW or sign output
Y102
-
Y200
CH1 CW or pulse output
Y201
CH1 CCW or sign output
Y202
-
1.2.4 Restrictions on Using Together with Communication Function
● The FP-XH series can communicate with external devices through the maximum of five
communication interfaces including the COM0 port supported as standard and COM1 to
COM4 ports used by communication cassettes.
● When using all the five ports from COM0 to COM4, the communication speed is 115.2 kbps
max. and the pulse output function supports two axes max. When using four or less number
of ports, the communication speed is 230.4 kbps max. and the pulse output function supports
six axes max.
WUME-FPXHPOSG-01
1.2 Restrictions on Combinations and Functions
High-speed counter function
Count input
Single-phase
CH8 Count input
CH9 Count input
-
CHA Count input
CHB Count input
-
Deviation counter clear output
-
-
CH0 Deviation counter clear
output
-
-
CH1 Deviation counter clear
output
Reset input
2-phase
-
CH8 Count input
-
CH8 Reset input
-
or CH9 Reset input
CHA Count input
CHA Reset input
-
or CHB Reset input
PWM output function
CH0 PWM output
-
-
CH1 PWM output
-
-
1-7
Advertisement
