Advertisement
9.1 PWM output function
9.1 PWM output function
9.1.1 Overview of PWM Output Function
The pulse output of an arbitrary duty ratio can be performed.
■
Comparison of functions and performances
Transistor output type
Channel no.
Output no.
CH0
Y0
CH1
Y2
CH2
Y4
CH3
Y6
(Note 1)
Functions, channel numbers and I/O numbers used are set in the tool software.
(Note 2)
I/O numbers used for each function should be allocated so that they do not overlap.
9.1.2 System Register Settings
Functions to be used are allocated in the "System register settings" dialog box. The following
procedure is explained on the condition that the FPWIN GR7 has already started.
1.
Select Options>System register settings from the menu bar.
The "PLC Configuration" dialog box appears.
2.
Select "Controller output setting (PLS / PWM)" from the left pane.
The setting menu for the system register "No. 402" appears.
9-2
Relay output type
Control active
Output no.
flag
R911C
Y100
R911D
Y200
R911E
-
R911F
-
Control active
Installation position
flag
Cassette mounting
R911C
part 1
Cassette mounting
R911D
part 2
-
-
WUME-FPXHPOSG-01
Advertisement
