Advertisement
4.2 Settings in Configurator PMX
2.
Make necessary parameter settings according to the application and press the [OK] button.
The settings will be stored as part of positioning parameter data.
Parameters
Parameter name
Pulse output method
Pulse output rotation
direction
Startup speed
Positioning repeat count
4-10
Default
Settings
(unit)
Pulse/Sign
Pulse/Sign, CW/CCW
When selecting Pulse/Sign mode:
CW direction +: Select this setting for the case that the
elapsed value is increased when Sign output turns off.
CCW direction +: Select this setting for the case that the
elapsed value is increased when Sign output turns on.
CW direction +
When selecting CW/CCW mode:
CW direction +: Select this setting for the case that the
elapsed value is increased at the time of CW output.
CCW direction +: Select this setting for the case that the
elapsed value is increased at the time of CCW output.
Set the startup speed common to each operation. This
setting is common to JOG operation, home return, E-point
control, P-point control, C-point control and J-point
100 (pps)
control.
Setting range: 1 to 100,000
Specify this setting for performing repetitive controls when
0
using E-point/P-point/C-point control.
WUME-FPXHPOSG-01
Advertisement
