Installation And Activation; Installation Via The Tia Portal - Siemens SINAMICS RAILCTRL Function Manual

Installation and activation

4.1

Installation via the TIA Portal

Commissioning using the TIA Portal library
The TIA Portal library is available when using Technology Extension RAILCTRL running on a
SINAMICS CU320-2 in conjunction with a SIMATIC 1500T controller. The TIA Portal library
supports you when configuring, commissioning and operating the system.
You can find the TIA Portal library in SIOS under the following address
support.industry.siemens.com/cs/ww/en/view/109762340).
Manual configuring using the TIA Portal and STARTER or SIMOTION SCOUT
You can manually configure SINAMICS CU320-2 using the TIA Portal and STARTER or
SIMOTION SCOUT. To do this, proceed as follows:
1. Install Technology Extension RAILCTRL using STARTER or SIMOTION SCOUT, see
Chapter "Installing using STARTER or SIMOTION SCOUT (Page 18)".
2. Commission the Technology Extension RAILCTRL, see Chapter "Commissioning
(Page 43)".
3. For the configured SINAMICS CU320-2, create a GSD or GSDML file. To do this, use the
following script (https://support.industry.siemens.com/cs/ww/en/view/92022677).
4. Import the GSD file that you created into the TIA Portal to establish communications
between the SIMATIC 1500T and the SINAMICS CU320-2.
A description on how to import a GSD file into the TIA Portal is available at the following
address (https://support.industry.siemens.com/cs/ww/en/view/109738401).
RAILCTRL
Function Manual, 09/2019, A5E38120767B
4
(https://
17