Page 64 of 408
System and site requirements
Figure 22
Typical layout of floor mounted cabinets
Reserve power supply layout and installation planning
553-3021-210
Standard 7.00
The mounting location of either the NTAK75 or the NTAK76 reserve power
unit is governed by the location of the main and expansion cabinets, and the
length of the NTAK0410 cable (the NTAK0410 cable is 6 ft [1830 mm]
long). Below each of the figures on the following pages, you will find
information detailing the maximum distance the center line of the battery unit
may be placed from the cabinet center line.
January 2002