7
Remove the metal drip tray.
Check the wrist strap in the bottom right of the cabinet. It may have
come loose during transit. If so, attach it to the velcro tab on the inside
right wall of the cabinet.
An empty cabinet weighs 25 lb (12 kg). Get help to lift the cabinet if
necessary.
8
Lift the cabinet and hang it on the mounting bracket hook.
9
Locate the two screw holes at the bottom towards the rear of the
cabinet. See Figure 42 on page 119.
10
Adjust the cabinet so that it is straight and level. Fasten the
bottom of the cabinet to the wall with the two 1 in. # 12 screws
provided with the cabinet.
Figure 42
Securing the cabinet to the wall
11
If additional expansion cabinets are being installed at this site,
repeat Steps 6 through 10 to install those cabinets.
Mounting the cabinets Page 119 of 408
WARNING
Screw holes
Option 11C
Planning and Installation Guide