Nortel Meridian 1 Option 11C Planning And Installation Manual page 121

Figure 43
Unlocking the
latches
Note: The bottom of the front cover is supported but not secured to
the cabinet. Be careful not to drop it.
2 Remove the metal drip tray.
Check the wrist strap in the bottom right of the cabinet. It may have
come loose during transit. If so, attach it to the velcro tab on the inside
right wall of the cabinet.
3 Locate the carton containing the pedestal.
Remove the pedestal from the carton and locate the four leveling feet.
Install the feet into the base of the pedestal.
4 Install the cabinet on the pedestal.
Lean the cabinet backwards. From under the cabinet and with a pair of
pliers, break off the two tabs located in the openings on the bottom of
the cabinet where the door hinges join the cabinet as shown in
Figure 44 on page 122.
Mounting the cabinets Page 121 of 408
Option 11C Planning and Installation Guide