Nortel Meridian 1 Option 11C Planning And Installation Manual page 407

Figure 99
Ground/Earth connection
Ground/Earth
Expansion cabinet as a power shelf for auxiliary processors Page 407 of 408
5 Refer to the ACD Max documentation to complete the installation
of the Max units and related cables.
Connectors for the cables in the expansion cabinet are located on the
panel below the cabinet's shelf. Refer to "Installing and connecting
cross-connect terminals to cabinets" on page 169 for information
about connection cables to the cabinet.
Note: The slots in the expansion cabinet are labeled 11 through 20.
The corresponding connectors for cables are labeled J11 through J20
or J1 through J10, depending on the type of cabinet.
connection
Ground/Earth wire in third
groove
Option 11C Planning and Installation Guide