General Information - Nortel Meridian 1 Option 11C Planning And Installation Manual

Page 388 of 408 Changing pre-programmed data

General information

553-3021-210 Standard 7.00
Modifying digital model telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Printing model information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Analog telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Digital telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Removing model telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Creating model trunks and changing route access codes . .. . . . . . . . . . . 401
Creating model trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 401
Modifying model trunks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402
Removing model trunks . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402
Printing model information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
Changing a route access code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 403
The pre-programmed data on the Option 11C system can provide an effective
starting point for programming the system's telephone and trunking
information.
This chapter shows how to change the default Option 11C numbering plan.
You may want to change the numbering plan for one or more of the following
reasons:
• to change the first number in the numbering plan
• to shift the start of the numbering plan to another card slot
• the default numbering plan interferes with the system data.
In addition to making changes to the default numbering plan, this section
provides information about modifying model telephone and trunk
programming stored in the Option 11C pre-programmed data.
January 2002