Nortel Meridian 1 Option 11C Planning And Installation Manual page 155

Figure 62
NTDK22 Single Port Fiber Expansion Daughterboard
Note 1: If using the plastic fiber cable, see Procedure 16 on page 159
Note 2: If using glass fiber optic cable, see Procedure 17 on
page 162.
5 Press firmly on the standoffs to ensure that the daughterboards
are secured to the SSC card.
6 Route the fiber cable through the cable routing guide on the SSC
card.
7 Insert the NDK20EA SSC card into slot "0" of the main Option 11C
cabinet.
8 Route the fiber cable through the Cable Routing Guide under the
main cabinet.
Note: Be sure to wrap the cable a minimum of one complete loop
around the Cable Routing Guide to allow extra cable for removing the
SSC card later.
Installing System Controller Cards Page 155 of 408
Option 11C Planning and Installation Guide