Ntak02 Sdi/Dch Card - Nortel Meridian 1 Option 11C Planning And Installation Manual

Page 218 of 408 Installing and connecting SDI and ethernet ports

NTAK02 SDI/DCH card

553-3021-210 Standard 7.00
Figure 90
Cable connection
NTAK1118 cable connection
2 Connect the NTAK1118 SDI cable to a TTY terminal.
Note: A Modem Eliminator is required to connect to a terminal.
3 If the system is to be accessed remotely, connect the SDI cable to
the system modem.
4 Connect the modem to an outside line.
5 Test the modem for proper operation once you have started up
the Option 11C system.
The NTAK02 SDI/DCH card can be used in the main and IP expansion
cabinets.
It can be configured to support ports for the following:
• two SDI and two DCHI
• one SDI, one DCHI, two ESDI
• four ESDI
January 2002