Installation Procedures
Contents
Reference list
General information
Installing the system
This section contains information on the following topics:
Reference list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Installing the system . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
The following are the references in this section:
•
Option 11C and 11C Mini Fault Clearing (553-3011-500)
•
Maintenance (553-3001-511)
This chapter is used when installing a new system, adding expansion cabinets
to an existing system, or reconfiguring existing cabinets to accommodate an
additional expansion cabinet. Make sure you have read and completed all
instructions contained in the prior chapters of this guide.
Follow the steps in Procedure 2 to install a new Option 11C system. Complete
each step as described before proceeding with the next step. Follow the steps
in Procedure 3 to add expansion cabinets to an existing system. Implement
Procedure 4 if you need to reconfigure your existing system. References may
be made to other chapters in this guide in order to provide additional
information.
Option 11C
Planning and Installation Guide
Page 101 of 408