Nortel Meridian 1 Option 11C Planning And Installation Manual page 95

Table 14
Minimum wall stud sizes - 24 inch spacing (Part 2 of 2)
4 X 18 Gauge
4 X 16 Gauge
4 X 14 Gauge
6 X 18 Gauge
3 Determine the placement of fasteners
Refer to the figures on the following pages if you need assistance with
the placement of fasteners on the backboard. In each figure, the
minimum sized backboard (2 ft by 6 ft) and the maximum sized
backboard (4 ft by 8 ft) are used as examples:
• Figure 31 on page 96: provides fastener locations for wood
and metal stud walls with the minimum allowed stud spacing of
16 in. (400 mm).
• Figure 32 on page 97: provides fastener locations for wood
and metal stud walls with the maximum allowed stud spacing
of 24 in. (600 mm).
• Figure 33 on page 98: provides fastener locations for
concrete and masonry walls.
Bracing cabinets against earthquakes Page 95 of 408
13 ft (3900 mm)
14 ft (4200 mm)
16 ft (4800 mm)
18 ft (5400 mm)
Option 11C Planning and Installation Guide