Nortel Meridian 1 Option 11C Planning And Installation Manual page 274

Page 274 of 408 Connecting the telephones
553-3021-210 Standard 7.00
2 Press the digits associated with the customized model and press
the pound key (#).
Dial tone disappears after the first digit is pressed and you hear special
dial tone after you press the pound key. If you enter a valid model
number the character display reads "OK, EXTENSION?". If you enter
an invalid model, the previous prompt is reissued and you hear
overflow tone.
3 Enter the customized extension number and press the pound
key.
You hear relocation tone. The character display shows "OK".
OR
If the extension number is already in use by another telephone, you
hear special dial tone again. The character display shows
"MULTI-LINE, EXTENSION?".
OR
If the extension number is not available for use, you hear overflow
tone. The character display shows "ERROR, EXTENSION?" and you
must repeat this step.
Note: If other keys require secondary extension numbers, you are
prompted until you enter all of the required extension numbers for the
model. These extension numbers cannot be defaulted. The text
display prompting for further extension numbers is "KEY kk EXT?"
where "kk" represents the key number requiring the extension number.
Each prompt for another extension number is accompanied by special
dial tone. When you are programming an extension number, the lamp
associated with that number on the telephone is lit.
4 Hang up the telephone handset.
After approximately 10 seconds, the telephone is configured.
Note: If you replace the handset before you complete the prompt
sequence, the installation will automatically fail. This can be useful if
you make an error and want to restart the procedure.
January 2002