Nortel Meridian 1 Option 11C Planning And Installation Manual page 158

Page 158 of 408 Installing System Controller Cards
Figure 65
Cabinet assignments for both types of Dual Port Daughterboards
Expansion Daughterboard
in connector 'Fiber 1"
Expansion Daughterboard
in connector 'Fiber 2"
Note: Both types of dual port daughterboards can be used in either connector
'Fiber 1' or 'Fiber 2'. However, the cabinet connection assignments are always
as shown above.
553-3021-210 Standard 7.00
Installing Fiber Daughterboard Cables
An A0632902 10 m plastic fiber optic cable is used to connect the main
cabinet to an expansion cabinet located within 10 m (33 ft) when using
short-haul fiber daughterboards.
A glass fiber optic cable, supplied and installed by a local facilities
provider, can be used to connect an expansion cabinet located up to 3
km (1.8 mi.) from the main cabinet when using long-haul fiber
daughterboards.
Do not staple or twist fiber optic cable. Do not bend it beyond a
minimum 35 mm bend radius (90° soft bend).
January 2002
Connection for Cabinet 1
Connection for Cabinet 3
Connection for faceplate LED
Connection for Cabinet 2
Connection for Cabinet 4