Nortel Meridian 1 Option 11C Planning And Installation Manual page 31

Cables and wires
Table 2
Cable and wire specifications (Part 1 of 3)
Cables and wires
A0317094 power cord
A0391685 power cord
NTDK27 Ethernet adaptor cable
A0632902 Fiber Optic cable (multi-mode
plastic)
Glass Fiber Optic cable (3 km) used on fibre
expansion daughterboards (multimode or
single mode, depending on interface)
Glass Fibre Optic Cable used on 100BaseF
expansion daughterboards (Multimode only)
up to 2 km
NTTK34AA cable
NTDK8305 cable
• M2616 or M2216 Central Answering Position (CAP). This telephone
must be equipped with an ACD LCD display in order to function as a
CAP telephone.
• Meridian 2250 (TCM) attendant consoles.
Equipment identification Page 31 of 408
Purpose/description
Connects a system cabinet to a 110 V ac
commercial power source
Length: 9 ft 10 in. (3000 mm).
Connects a system cabinet to a 220 V ac
commercial power source
Length: 9 ft 10 in. (3000 mm).
Provides a 15-pin AUI ethernet interface.
Connects a Main and Expansion cabinet by
interfacing with an expansion daughterboard
and a Fiber Receiver card.
Length: 10 m (33 ft)
Must be supplied locally by a facilities provider.
Length up to 3 km (1.8 mi)
Must be supplied locally by a facilities provider.
Length up to 2 km
100BaseT connection between the Main and
IP Expansion cabinets in a pt. to pt.
configuration.
100BaseT connection between the Main and
IP Expansion cabinets in a pt. to pt. or LAN
configuration.
Option 11C Planning and Installation Guide