Notice For International Installations; European Compliance Information - Nortel Meridian 1 Option 11C Planning And Installation Manual

Notice for International installations

European compliance information

The Option 11C frame ground of each system cabinet must be tied to a
reliable building ground reference.
Users should not attempt to make electrical ground connections
themselves, but should contact their local electrical inspection
authority or electrician.
If there is insufficient planning or technical information present for your
country of operation, contact your regional telecommunications distributor or
authority for assistance.
The Option 11C system meets the following European technical regulations:
CTR 1, CTR 2, CTR 3, CTR 4, CTR 6, CTR 10, CTR 12, CTR 13, CTR 15,
CTR 17, CTR 22, CTR 24, and the I-ETS 300 131.
Supported interfaces
Analog interfaces are approved based on national or European specifications.
Digital interfaces are approved based on European specifications.
Safety specifications
The Option 11C system meets the following European safety specifications:
EN 60825, EN 60950, EN 41003
Electromagnetic Compatibility
Table 8 shows the Electromagnetic Compatibility (EMC) specifications for
the Option 11C system.
Regulatory information Page 79 of 408
CAUTION
WARNING
Option 11C Planning and Installation Guide