Nortel Meridian 1 Option 11C Planning And Installation Manual page 405

Expansion cabinet as a power shelf
for auxiliary processors
Contents
General information
Expansion cabinet used as a power shelf
This section contains information on the following topics:
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405
Expansion cabinet used as a power shelf . . . . . . . . . . . . . . . . . . . . . . . . 405
This chapter contains the procedure for adding a cabinet to be used as a
stand-alone power shelf for Aux processor units (such as Max IPE).
Follow this procedure to add an expansion cabinet used as a power shelf for
auxiliary processor units.
Procedure 58
Expansion cabinet as a stand-alone power shelf
1 Locate the carton containing the expansion cabinet. Install it as
described in "Mounting the cabinets" on page 115.
• Make sure that it is mounted according to the plan.
• Make sure that it is securely mounted.
• Make sure that the pedestal is properly installed if the cabinet
is to be mounted on the floor.
2 Make sure that the AC power cord is disconnected from the
power outlet.
Option 11C Planning and Installation Guide
Page 405 of 408