Nortel Meridian 1 Option 11C Planning And Installation Manual page 234

Page 234 of 408 System software installation
How to install software in a new system
553-3021-210 Standard 7.00
If the keycodes are unsuccessful, check the following:
• software issue
• feature set name
• any additional packages
• TNs
• ISM parameters
• security ID
• auxiliary ID (the old site ID, if this is an upgrade)
• ensure the correct keycodes were entered. All items must match the
Keycode Datasheet exactly.
For an Option 11C Mini system, check that the number of TNs has been
entered correctly from the keycode sheet.
When performing a new system installation, please ensure that the default
AUX ID matches the AUX ID from the Keycode Datasheet.
If they still are not successful, then call your Service Representative.
Summary of steps
The Software Installation steps are summarized in the following list:
• Get MAC address from IP daughterboard
• Power up/Install IP Expansion cabinet
• Power up Main cabinet. Ensure link led is green
• Perform software installation on the Main cabinet
• Select the New System Installation menu
• Select Feature Set and packages
• Select a database
• Select Incremental Software Management (ISM) parameters.
Ensure Survivability parameter is configured correctly
• Configure MAC addrress of the IP Expansion cabinet
January 2002