Printing Model Information; Analog Telephones; Digital Telephones; Removing Model Telephones - Nortel Meridian 1 Option 11C Planning And Installation Manual

Page 400 of 408 Changing pre-programmed data

Printing model information

Analog telephones

Digital telephones

Removing model telephones

553-3021-210 Standard 7.00
For more information about LD 11 and its associated prompts and
commands, refer to the Option 11C Software guides that are shipped with the
system.
To print information about model telephones, use LD 20.
LD 20
REQ PRT
TYPE 500 M
MODL YYY "YYY" = the telephone model number.
If you want to print all of the models for
this telephone type, leave this value blank.
Note: To print M3000 telephone models, you must enter "TYPE 3000
M". If you enter "TYPE 2XXX M", you print all the Meridian Digital
Telephone models except the M3000.
LD 20
REQ PRT
TYPE 2XXX M or 3000 M "XXX" = the telephone type
MODL YYY "YYY" = the telephone model number
(between 1 - 127) If you want to print all
of the models for this telephone type, leave
this value blank.
Use LD 10 to remove analog telephone models and LD 11 to remove digital
telephone models. Respond as follows to the prompts in either overlay:
LD 10 or LD 11
REQ OUT
January 2002