Nortel Meridian 1 Option 11C Planning And Installation Manual page 151

Figure 59
Cable Routing Guide under Main Option 11C cabinet
Procedure 13
Installing the 100BaseF IP daughterboard on the SSC card on the Main
Cabinet
1 Put on the anti-static wrist strap.
2 Place the SSC card on a clean flat surface.
3 Remove protective plugs from the connectors on the
daughterboard.
4 Insert the A0817052 MT-RJ to ST cable end into the
daughterboard connector. See Figure 61 on page 154 for
identification of cable ends.
Repeat step 4 if a second fiber connection is required.
Installing System Controller Cards Page 151 of 408
Option 11C
Cable Routing Guide
Planning and Installation Guide