Cross-connecting telephones
Connect the telephones according to the following figures. Cross-connections
for Analog (500/2500 type) telephones are shown in Figure 94 on page 250,
and for Meridian Digital Telephones in Figure 95 on page 251.
Procedure 40
Cross-connecting telephones
1
Locate telephone terminations at the cross-connect terminal.
2
Connect Z-type cross-connecting wire to the leads of the
telephone.
3
Locate line circuit card (TN) terminations at the cross-connect
terminal.
4
Connect the other end of the cross-connecting wire to the
assigned TN terminal block.
Connecting the telephones Page 249 of 408
Option 11C
Planning and Installation Guide